Freight Density and Your LTL Price: A Practical Guide
Nov 16, 2026

Most shippers know that weight drives an LTL price. Fewer know how much the shape of the freight matters. Two pallets can weigh the same and still price very differently, because carriers sell space on a trailer as much as they sell weight capacity.
Here is how density works, why it matters more since the 2025 classification changes, and what you can do about it this week.
What freight density is
Density is how many pounds your freight packs into each cubic foot of trailer space. You can work it out in a minute with a tape measure:
1. Multiply the length, width and height of the shipment in inches.
2. Divide by 1,728 to get cubic feet.
3. Divide the weight by the cubic feet.
A 48 x 40 pallet built 48 inches tall takes up about 53 cubic feet. If it weighs 500 pounds, its density is about 9.4 pounds per cubic foot.
Why density sets your class, and your class sets your rate
LTL rates are built on freight class, from the National Motor Freight Classification (NMFC). Since July 19, 2025, the NMFC has moved thousands of items to density-based classes on a 13-step scale. It runs from class 50 for freight at 50 pounds per cubic foot or more, up to class 400 for freight under 1 pound per cubic foot.
The rule of thumb is simple: lower density means a higher class, and a higher class means a higher rate per pound. A few of the steps most shippers run into:
- 15 to 22.5 lb per cubic foot: class 70
- 10 to 12 lb per cubic foot: class 92.5
- 8 to 10 lb per cubic foot: class 100
- 6 to 8 lb per cubic foot: class 125
- 4 to 6 lb per cubic foot: class 175
Some items still have their own class in the NMFC, so check your commodity. But for a growing share of freight, density decides it.
Air on a pallet costs money
Take that same 500-pound pallet on a 48 x 40 base:
- Built 48 inches tall, it is about 9.4 pounds per cubic foot, which is class 100.
- Built 72 inches tall, it is about 6.2 pounds per cubic foot, which is class 125.
Same product, same weight, but the taller pallet moves up a class and pays a higher rate. Empty space in cartons, oversized boxes and a short top layer all add height without adding weight.
Declare it right the first time
Carriers measure and reweigh freight on their docks. If the dimensions, weight or class on the bill of lading do not match what they find, they reclass or reweigh the shipment and bill the difference, often with an inspection fee on top. That is how a quote turns into a bigger invoice weeks later.
The fix is to quote with real numbers: the actual length, width, height and weight of each pallet, and the class that matches its density.
One bigger shipment usually beats two small ones
Every LTL shipment carries costs that do not change much with weight: a pickup stop, a delivery stop, dock handling and paperwork. Many shipments also hit a minimum charge. Send the same freight as two small shipments and you pay those costs twice. If two orders are going to the same receiver within a day or two, combining them is usually cheaper per pound.
Three things you can do this week
1. Measure before you quote. Put the real dimensions of each pallet into the quote, not a standard size. It is the best way to make sure the price you book is the price you pay.
2. Combine where you can. Ship orders for the same receiver together when timing allows.
3. Build tighter pallets. Right-size cartons, stack evenly, and avoid a short top layer. Every few inches you take off a light pallet raises its density.
Three questions to ask any carrier
- How do you measure my freight after pickup, and will I see the dimensions you used?
- If my freight is reclassed or reweighed, when will I hear about it, before or on the invoice?
- Can you show me how my quote changes if I combine shipments or change the pallet size?
The practical takeaway
Density is the lever most shippers are not pulling. Measure, declare the real numbers, and build pallets without wasted air.
Want to see what it does to your own freight? Get a quote on ontimetrucking.com with your real dimensions, or reply to Sal with a recent shipment and we will walk through it with you. On Time Trucking has run its own trucks in New York, New Jersey and Connecticut since 1983.
Sources
- NMFTA: How Carriers Can Prepare for the 2025 NMFC Changes — nmfta.org
- NMFTA: Density and class breaks for the 13-sub structure — help.nmfta.org
- NMFTA Disposition Bulletin 1371 (Docket 2025-1) — nmfta.org